> >>FUTURELIGHT PLB-280 Spot/Beam
FUTURELIGHT PLB-280 Spot/Beam Padidinti
Ankstesnis Tęsti

FUTURELIGHT PLB-280 Spot/Beam

Nauja prekė

Pristatymas 5-7 darbo dienos

1 849,00 €

Apie prekę

  • Equipped with an Osram Sirius HRI 280 W discharge lamp
  • Upgrade via optional wireless receiver module for WDMX operation (Wireless Solution - made in Sweden)
  • Supports RDM (Remote Device Management)
  • High PAN/TILT speed
  • 14, 16, 20 or 23 DMX channels selectable
  • Spot, beam and due to the use of the frost filter also wash light in one device
  • Color wheel with 13 different dichroic color filters plus white
  • Rainbow effect with adjustable speed in both directions
  • Effect wheel with rotating 6-facet linear prism, 8-facet prism and frost filter
  • The prism rotate in both directions and at different speeds
  • Gobo wheel 1 with 9 rotating gobos plus open
  • All rotating gobos can be interchanged
  • Slot-in gobo system for exchanging gobos without tools
  • Gobo wheel 2 with 14 static gobos plus open
  • With gobo shake function
  • Strobe effect with adjustable speed
  • Random strobe effect
  • Motorized focus
  • Autofocus
  • Motorized zoom with 2 - 10° beam angle (Beam mode) and 5.5 - 23° beam angle (Spot mode)
  • Dimmer
  • PAN angle switchable between 540° and 630°
  • Exact positioning via 16 bit PAN/TILT movement resolution
  • Automatic position correction,
  • Switch-mode power supply, automatic power supply adaption between 100 and 240 Volts without power selector
  • ESDC function (Easy Service Data Check) with battery-buffered control board for operation time readouts etc. (the Li-Ion battery 3.7V, AAA, 10440 is not included)
  • Control board with graphic LCD for adjusting the DMX-starting address, PAN/TILT reverse, reset, lamp on/off, operating hours
  • DMX-controlled operation or stand-alone operation with master/slave function
  • Number of scenes in Program Run can be changed individually
  • The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
  • Software upload by optional accessory via DMX link
  • With Osram Sirius HRI 280 W lamp
  • Power connection via Neutrik PowerCon jack and included power cable
  • DMX-control via any standard DMX-controller
  • Effect: Strobe effect; gobo effect; Single Beam
  • Equipment: Gobos rotating; Iris; Prisma Linear; Prisma 8-fold; Focus motor-driven; Frost filter; Gobos static; Zoom motor-driven
  • Color generation: Colour wheel
  • Power supply of device: Mains Input Socket (M) Powercon (Power-In) blue fehlt provided
  • Control: WDMX upgradeable optional; Stand-alone; DMX; RDM

Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 360 W
DMX channels: 14/16/20/23
DMX connection: 5-pin and 3-pin XLR
Flash-rate: 20 Hz
Beam angle: 2-10° (Beam mode), 5.5-23° (Spot mode)
Color-wheel: 13 dichroic filters plus open
Rotating gobo-wheel: 9 gobos and open
Outside diameter of the gobos: 16 mm
Image diameter of the gobos: 12 mm
Static gobo wheel: 14 gobos and open
Maximum PAN-movement: 630°
Maximum TILT-movement: 270°
Dimensions (L x W x H): 402 x 369 x 534 mm
Lamp type: Discharge lamp
Weight: 19 kg
Cooling fan: yes, temperature controlled
IP classification: IP20
Power consumption: 360 W
Laser class: Without laser
Beam angle: 2 - 23°
Height: 53,4 cm
Depth: 36,9 cm
Width: 40,2 cm
Max. PAN movement: Exact positioning (16 bit resolution) 540° Positioning switchable to 630° Pan tilt feedback
Max. TILT movement: Exact positioning (16 bit resolution) 270° Pan tilt feedback
DMX channels: 14; 16; 20; 23
Ecodesign regulation: Yes
Special product: Not designed for household room illumination
Purpose: Show effect lighting
Lamp: 1 x conventional with EEI C included.

30 kitos prekės toje pačioje kategorijoje: